Find your machine in the table below. Most everyday Janomes (HD3000, JW8100, MOD-30, 3160QDC, Sewist 780DC) are low shank and take Janome's Even Feed Foot 200311003, which is on Amazon. Front-loading models like the Arctic Crystal and HD-1000 need 200310002. Skyline S3 and other 7mm high-shank models need 200309008, 9mm models without AcuFeed need 202137009, and the HD9 has its own high-speed foot. If your Janome has AcuFeed, skip this page: the walking foot is built in.
Quick picks
| Best for most Janomes | Janome Even Feed Foot with Quilting Guide (200311003) | Amazon |
|---|---|---|
| For 7mm high-shank models | Janome Even Feed Foot with Quilting Guide (200309008) | Amazon |
| For 9mm machines without AcuFeed | Janome Even Feed Foot for 9mm Without AcuFeed (202137009) | Amazon |
| For front-loading Janomes | Janome Even Feed Foot with Quilting Guide (200310002) | Amazon |
| Best third-party open toe for low-shank Janomes | HONEYSEW Open Toe Walking Foot with Guide | Amazon |
| For the HD9 and 1600P | CKPSMS High Shank Walking Foot (alt. 767403016) | Amazon |
How we picked
Fit came from Janome. Janome's US site lists every machine each even feed foot fits, by part number, and we read those lists on October 21, 2026 for the Even Feed Foot (seven versions), the Convertible Even Feed Foot Set and the AcuFeed dual feed foot. Retailer model lists don't always agree with Janome's, so where they differ we went with Janome.
Then we searched Amazon for walking feet that Janome owners buy, matched the genuine Janome listings to Janome's part numbers through the manufacturer part number in each listing, and kept third-party feet with real sales and ratings. Third-party listings say "low shank" or "high shank" rather than naming every Janome, so we tell you how to check them.
This is a spec review. We compared Janome's fit lists with the product listings; we didn't fit each foot to each machine. How we research.
Which walking foot fits your Janome
| Machine type | Examples from Janome's list | Janome even feed foot |
|---|---|---|
| Low shank, 5 to 7mm | HD-3000, HD-5000, JW8100, MOD-30, MOD-50, MOD-100, MOD-200, 3160QDC-G, 4120QDC, 2030DC, Sewist 500, 721, 725S, 740DC, 780DC, Magnolia 7318 to 7360, DC5100, Memory Craft 6500P, TS200Q | 200311003 closed toe; 200339007 open toe with guide; 214517004 convertible set |
| Front loading | Arctic Crystal, HD-1000, HD-1000 Black Edition, HD-2200, 2206, 2212, 2222, Sew Fresh, Blue Couture, Pink Sorbet, Hello Kitty models, 1522 series | 200310002 |
| High shank, 7mm | Skyline S3, S3 Anniversary, Memory Craft 11000 Special Edition, Memory Craft 1000 | 200309008 closed toe; 200338006 open toe with guide; 214516003 convertible (also lists the MC6600P and 7700QCP) |
| 9mm, no AcuFeed | Skyline S5, Memory Craft 9900, 9850, 9850 Limited Edition, 6650 | 202137009; 202133005 convertible set |
| High-speed straight stitch | HD9, HD9 Professional, HD9BE, HD9QC Professional, 1600P-QC, HD8 | 767403016 |
| AcuFeed machines | Skyline S6, S7, S9, Skyline 8; Continental M6, M7, M8, M17; Memory Craft 6700P, 8200QC, 8900QCP SE, 9400QCP, 9410QC, 9450QCP, 9480QCP, 12000, 14000, 15000 | No walking foot: AcuFeed dual feed foot 859819017 |
| Older AcuFeed | Memory Craft 6600P, 7700QCP | AcuFeed foot 846570013 |
From Janome's product pages for each part number, read October 21, 2026. The low-shank lists run to about 100 machines each, so this table shows the common ones. If yours isn't here, log in to Janome's site to see your machine's compatibility, or ask a Janome dealer.
Brother or Singer too? Our Brother walking foot guide works from Brother's SA140 and SA188 lists, and the Singer walking foot guide decodes Singer's fit groups.
Low shank, high shank, front loading or AcuFeed
Janome splits its feet two ways. The shank is the height of the bar the foot screws onto: low shank on most everyday models, high shank on the bigger 7mm and 9mm machines and the HD9. Then the bobbin system: Janome's front-loading machines, with the bobbin case loaded from the front, have their own foot, separate from the top-loading low-shank ones. Stitch width sets the opening in the foot, which is why the 9mm machines get a different part from the 7mm ones.
Not sure about your shank? Our presser feet guide shows how to measure it: about half an inch from the bottom of the foot to the center of the screw is low shank, about an inch is high shank. The manual's optional-accessories page also lists the part.
The best walking feet for Janome machines
Janome Even Feed Foot with Quilting Guide (200311003)
This is the genuine Janome foot for the machines most people own: the HD3000, JW8100 (which already includes one), MOD series, 3160QDC, Sewist line and Magnolias are all on Janome's list for it. The Amazon listing gives the manufacturer part number 200311003 and says the quilting guide is detachable. It showed 100+ bought in the past month when we checked.
Amazon's title calls these "horizontal rotary hook" models, which is Janome's way of saying top-loading drop-in bobbin. If your bobbin loads from the front, scroll down to 200310002.
- Part200311003 (Janome America)
- Fit (Janome)low-shank 5 to 7mm machines, about 100 models
- Includesdetachable quilting guide
- Amazon ratings695
Why it stands out
- Genuine Janome part on Janome's own fit list
- Quilting guide included
- Covers the most popular Janomes
Think twice if
- Your Janome is front loading, high shank or 9mm
- You want an open toe; that's part 200339007, which we didn't find on Amazon
Janome Even Feed Foot with Quilting Guide (200309008)
The high-shank 7mm foot. Janome's list for 200309008 is short: the Skyline S3, its Anniversary Edition, the Memory Craft 11000 Special Edition and the Memory Craft 1000. Amazon labels it for "Memory Craft embroidery machines", which is true but vague, so match the part number rather than the title.
- Part200309008 (Janome America)
- Fit (Janome)7mm high shank: Skyline S3, S3 Anniversary, Memory Craft 11000 SE, Memory Craft 1000
- Includesquilting guide
- Amazon ratings115
Why it stands out
- Genuine Janome part with a quilting guide
- The only high-shank 7mm option Janome lists besides the open toe and convertible versions
Think twice if
- Your machine is low shank; it won't fit
- Your Skyline has AcuFeed (S6 and up); you don't need it
Janome Even Feed Foot for 9mm Without AcuFeed (202137009)
The 9mm machines that lack AcuFeed need this one, and the listing names the Skyline S5 and the 9900. A 7mm foot on a 9mm machine risks a needle strike on a wide stitch, so don't substitute. The listing also pitches it for topstitching collars and sleeves, where a bulky seam allowance pushes the top layer ahead.
- Part202137009
- Fit (Janome)Skyline S5, Memory Craft 9900, 9850, 9850 LE, 6650
- Width9mm
- Amazon ratings36
Why it stands out
- Correct opening for 9mm stitch width
- Matches Janome's own part number
Think twice if
- Few ratings so far
- You want open toe and quilting guides; Janome's 202133005 convertible set has both
Janome Even Feed Foot with Quilting Guide (200310002)
Janome's budget and heavy-duty front-loaders, including the Arctic Crystal and HD-1000, are on a separate list, and this is their foot. Amazon titles it "oscillating hook models", the hook that goes with a front-loading bobbin case. The listing also names Juki and Singer models with the same hook, which tells you the design is shared across brands.
- Part200310002 (Janome America)
- Fit (Janome)front-loading models incl. Arctic Crystal, HD-1000, HD-2200, 2212
- Includesquilting guide
- Amazon ratings122
Why it stands out
- The genuine foot for Janome's front-loading line
- Quilting guide included
Think twice if
- Your Janome has a drop-in bobbin; get 200311003
HONEYSEW Open Toe Walking Foot with Guide
The best-selling walking foot we found, at 1,000+ a month. It's a low-shank open-toe foot, and the open toe is the reason to choose it over Janome's closed 200311003: you can see where the needle enters, which makes stitch in the ditch easier. The listing names Brother and Singer rather than Janome and gives no width, so fit it and turn the handwheel before you sew a zigzag.
- Typeopen toe, with guide bar
- Fit (per listing)low-shank models
- Materialstainless steel
- Amazon ratings1,151
Why it stands out
- Open toe with a guide bar
- Large owner base and steady sales
Think twice if
- Your Janome is high shank, 9mm or front loading
- You'd rather have Janome's guaranteed fit
CKPSMS High Shank Walking Foot (alt. 767403016)
The HD9 and 1600P are straight-stitch, high-speed machines, and Janome's foot for them is 767403016. We didn't find that genuine part on Amazon. This third-party foot lists 767403016 among its alternate part numbers and names the HD9 and 1600P. The listing is clear that it fits high-shank straight-stitch machines only.
It's the weakest-rated pick here (4.1 stars), so if a Janome dealer can supply 767403016, that's the surer buy.
- Shankhigh
- Alt part numbersincl. 767403016
- Fit (per listing)Janome 1600P, 1600P-QC, HD9, HD9P, HD9BE; Juki TL-2010Q and other TL models
- Usestraight stitch only
- Amazon ratings66
Why it stands out
- Names the HD9 and 1600P by model
- Also lists Juki TL-series straight-stitch machines
Think twice if
- Third-party, lower ratings
- Any machine with a zigzag; it's straight stitch only
AcuFeed machines: you already have one
AcuFeed is Janome's built-in top feed. Janome says its AcuFeed foot is "specially designed to engage the AcuFeed system, and move the top layer of fabric in sync with the bottom layer." The Sewing Machine Man newsletter explains the difference: the AcuFeed foot has metal teeth and is driven from inside the machine, while a normal walking foot rides the needle clamp screw on a lever.
Janome lists its AcuFeed foot and holder (859819017) for 24 machines, from the Skyline S6, S7 and S9 to the Continental M17 and Memory Craft 15000, and the older AcuFeed foot (846570013) for the Memory Craft 6600P and 7700QCP. Owners of those machines should buy AcuFeed feet, not walking feet. One example is the Janome AcuFeed quilt piecing foot (twin) for 9mm machines, a 1/4 inch foot that works with the AcuFeed holder. Check that your model uses the twin-type holder before you buy it.
The Skyline S6 is our pick for serious quilters in the best Janome sewing machines, and AcuFeed is a big part of the reason.
Open toe, closed toe or the convertible set
For low-shank machines, Janome sells the closed-toe 200311003, an open-toe version with a quilting guide (200339007) and the Convertible Even Feed Foot set (214517004), which Janome describes as a closed-toe even feed foot plus an open-toe sole, a ditch quilting guide and an adjustable quilting guide. High-shank 7mm machines have the same three choices (200309008, 200338006, 214516003), and 9mm machines have the plain foot or the convertible set (202133005).
If you'll mostly quilt in the ditch, the open toe or the convertible set is worth the extra. For general straight-line quilting and binding, the closed toe does the job. We only found the closed-toe versions on Amazon; the others are sold through Janome dealers.
Janome also sells a Rotary Even Foot (3237777) that feeds with belts instead of teeth. Janome pitches it for knits and leather, and for hems with a step in thickness, and lists it for high-shank 7mm, low-shank and front-loading models. It's an alternative for those fabrics, not a quilting foot.
Side by side
| Foot | Janome machines | Toe | Guide | Genuine Janome |
|---|---|---|---|---|
| 200311003 | Low shank 5 to 7mm | Closed | Yes | Yes |
| 200309008 | High shank 7mm | Closed | Yes | Yes |
| 202137009 | 9mm without AcuFeed | Closed | Not stated | Yes |
| 200310002 | Front loading | Closed | Yes | Yes |
| HONEYSEW open toe | Low shank (listing) | Open | Yes | No |
| CKPSMS high shank | HD9, 1600P (listing) | Not stated | Not stated | No |
A cheaper generic option for low-shank Janomes is the YEQIN 7mm even feed walking foot, which names Janome in its listing, states its width and says plainly it is a non-OEM replacement made in Taiwan.
Fitting and using it
Every Janome even feed foot fits the same way as other walking feet: remove the foot holder, hook the foot's arm over the needle clamp screw, tighten the screw firmly and turn the handwheel by hand to check the needle clears the foot. Our guide to using a walking foot has the step-by-step, plus stitch length by batting and the guide bar. Janome's page for the even feed foot also calls it "great for topstitching", which is worth knowing for jeans and bags.
If your Janome is a heavy-duty HD3000, our Janome HD3000 review covers what else it does well, and our quilting machine picks include the JW8100, which ships with this foot in the box.
Part numbers and machine lists from Janome America's product pages for the Even Feed Foot, Convertible Even Feed Foot Set, AcuFeed dual feed foot and Rotary Even Foot, read October 21, 2026. AcuFeed mechanism from the Sewing Machine Man newsletter. Product details and sales from each Amazon listing, October 21, 2026. Prices change often, so the buttons show the current price on Amazon. How we research · Affiliate disclosure