StitchTested
A sewing machine and a serger side by side on a sewing table with a knit garment in progress

Sewing machine vs serger: what each does, and whether you need both

A sewing machine builds the garment; a serger finishes it. You can sew without a serger, but you can't sew a whole project with only a serger. Here's how to decide if the second machine is worth it.

Spec review · Updated · We earn a commission when you buy through our Amazon links.

A sewing machine builds things; a serger finishes them. The sewing machine puts a seam anywhere on the fabric, and it's the machine that does buttonholes and zippers. A serger stitches over the raw edge with three or four threads while a knife trims it, so one pass leaves a stretchy, fray-proof seam. Buy the sewing machine first. A serger is the second machine worth adding if you sew clothes, knits above all.

The stitch is the difference

Lockstitch versus overlock stitch Left: a sewing machine lockstitch, one needle thread and one bobbin thread interlocking in the middle of the fabric. Right: a serger overlock stitch with looper threads wrapping a trimmed fabric edge. Sewing machine: lockstitch 2 threads · sews anywhere on the fabric no trimming Serger: overlock 3 or 4 threads · wraps the edge · trims as it sews
A lockstitch can go anywhere. An overlock stitch lives on the edge.

A lockstitch (sewing machine) links a top thread and a bobbin thread inside the fabric. It's strong and neat, and it can go anywhere on the piece. That's why construction runs on it, along with topstitching and buttonholes.

An overlock stitch (serger) uses loopers to wrap thread around the fabric edge while one or two needle threads hold it, and a knife trims the edge just ahead. The looped structure stretches. On knits, that's exactly what you want.

A zigzag-finished edge next to a serged edge
Zigzag finish (sewing machine) next to an overlocked edge (serger). Both stop fraying. The serged one took a single pass.

Task by task: which machine does what

TaskSewing machineSerger
Straight seams on woven fabricYesYes, trimmed and finished in one pass
Seams on stretchy knitsYes, with a stretch or zigzag stitchYes, and this is where it shines
Finishing raw edgesYes, zigzag or overcast (slower)Yes, fast and professional
ButtonholesYesNo
ZippersYesNo (except a few edge techniques)
Topstitching, quilting, appliquéYesNo
Rolled hems on scarves and napkinsWith a rolled hem foot (fiddly; our hemming foot guide covers the start)Yes, quick (see serger rolled hem)
T-shirt style twin-needle hemsWith a twin needleNo (that's a coverstitch machine)
Gathering and rufflesYes, with long stitchesYes, with differential feed or a gathering foot

Read down the columns and the pattern is plain: the sewing machine can do every task, some of them slowly. The serger does fewer tasks, and does them quicker and tidier.

Do you need a serger?

A knit T-shirt seam being sewn on a serger
Knit garments are where a serger saves the most time.
If you mostly sew...Serger worth it?
QuiltsNo. Quilt seams are enclosed.
Home decor, bags, mendingRarely
Woven garments occasionallyNice to have; zigzag works fine
Knit garments: T-shirts, leggings, activewearYes, a big upgrade
Lots of clothes, or selling what you makeYes

Still learning? Put the money into a good sewing machine; our beginner sewing machine guide covers that. The serger can wait until most of your projects are knit garments. At that point, it's the upgrade you'll notice most.

Getting serger-like results without a serger

Not ready for a second machine? A sewing machine finishes seams well. Here are the standard techniques, from quickest to neatest.

The quickest is a zigzag along the edge. Set a medium width and length and sew so the right swing of the needle just goes off the fabric edge. It works on almost anything. No serger yet? A zigzag stitch with the right settings finishes seams on any sewing machine.

Closer to the serged look is an overcast stitch with an overcasting foot. Many machines have a dedicated overcast stitch, and some (the Brother SE700 is one, per its listing) include the foot, which keeps the edge flat.

Pinking shears need no stitching at all. On a stable woven that won't be washed often, the zigzag cut slows fraying.

French seams are the neatest of all. Sew wrong sides together and trim. Then fold, sew right sides together, and the raw edge is enclosed. On sheer and lightweight wovens they beat serging, especially where the inside shows.

For knits, use a stretch stitch: a lightning-bolt or narrow zigzag, a ballpoint needle and a slightly longer stitch length. Seams sewn that way don't pop when stretched.

What you give up is speed. Each of these takes an extra pass or extra trimming, where a serger sews and trims in the same pass.

Serger vs coverstitch vs sewing machine

People often buy a serger expecting it to hem T-shirts. It won't. The two parallel rows of stitching on a T-shirt hem, with loops on the inside, are a coverstitch. So the jobs split three ways: sergers finish edges and seam knits, coverstitch machines hem knits, and sewing machines do everything else. A few higher-end machines combine serger and coverstitch, but switching between the two modes is more involved. For most home sewists the buying order is sewing machine, then serger, then maybe a coverstitch. For the stretchy hem a serger can't make, see our best coverstitch machine picks. If you already own a serger, our Brother 1034D threading guide covers the lay-in order, and 1034D vs 1034DX shows which of the two to buy.

If you're buying: the popular choices

Here's what topped Amazon's best-seller lists on October 3, 2026.

In Sewing Machines, #1 was the Brother XM2701 (27 stitches, automatic needle threader, drop-in bobbin). For a computerized step up, the Brother CS5055 adds 60 stitches and seven one-step buttonholes.

In Sergers & Overlock Machines, #1 was the Brother 1034D: 3 or 4 threads, color-coded threading, a metal frame and 12,000+ ratings. If you want 2-thread stitches too, the Singer HD0500S adds them, along with a free arm and a lower looper LED.

Full picks are in best serger for beginners.

What a serger can't replace

A sewing machine sewing a zipper into a skirt
Zippers stay on the sewing machine. So do buttonholes and topstitching.

Even sewists who make nothing but garments go back to the sewing machine for every zipper and buttonhole, for waistband topstitching, and for any hem that needs one clean line. The twin-row hem on a store-bought T-shirt isn't a serger stitch either. It's a coverstitch, which needs a separate coverstitch machine like the Brother 2340CV or a twin needle on your sewing machine.

Running costs

A serger draws on three or four cones of thread at once, so buy thread on large cones. Neutrals (white, black, gray, beige) blend with most fabrics, because the serged edge usually sits inside the garment. Our serger thread guide has the details. The knife blade wears out eventually, but replacements for popular models are inexpensive.

The order to buy them in

Sewing machine first, every time, because it's the only one of the two that can finish a whole project. Add the serger the month you notice you're mostly sewing knits, or zigzagging every seam allowance and wishing it were done. A sensible pair is the Brother CS5055 now and the Brother 1034D when that day comes.

Machine specs and ranks come from Amazon listings checked October 3, 2026. Prices change often, so the links above show the current price on Amazon. How we research · Affiliate disclosure

Questions people ask

What is the difference between a sewing machine and a serger?
A sewing machine sews a lockstitch with one needle thread and one bobbin thread, and can sew anywhere on the fabric. A serger sews an overlock stitch with three or four threads around the fabric edge while a knife trims it. Sewing machines construct; sergers finish edges and sew stretchy seams quickly.
Can I use a serger instead of a sewing machine?
Not completely. A serger can sew and finish many seams on knit garments in one pass, but it can't sew buttonholes, topstitching, most zippers or anything away from the edge. You still need a sewing machine for those.
Do beginners need a serger?
No. Start with a sewing machine and finish seams with a zigzag or overcast stitch. Add a serger once you sew knits or garments regularly and want quicker, store-bought looking seam finishes.
Can a sewing machine do what a serger does?
Partly. A zigzag or overcast stitch, with an overcasting foot, stops edges fraying and works on knits. It's slower, doesn't trim the edge and looks less like a store-bought finish, but it's perfectly functional.
Is an overlocker the same as a serger?
Yes. Overlocker is the common name in the UK and Australia; serger is the common name in the US. Both refer to the same type of machine.
Should I buy a serger or an embroidery machine first?
If you sew clothes, buy the serger first, especially for knits: it improves every garment. If you mostly want to personalize gifts and decor, the embroidery machine adds more. Both come after a sewing machine.